Overview The ZU1000 is a wire replacement solution designed for use with the FreeWave ZumEdge radio system. Itis a kitted solution and is pre-configured from the factory as a bi-directional I/O ...

Issue: In the FGR3-C firmware version 11.00.11 (Initial Release): Signal and Noise values reported from the firmware in hexadecimal format (0-F) instead of decimal  Noise value reported as an inst...

  Creating a Basic Network: https://youtu.be/JVQEP9TQMkI Gateway Configuration: https://youtu.be/95z1bgpt3FI Endpoint Configuration: https://youtu.be/KgMr8pi3Jc8 ZumEdge Intro v2: https://youtu...

For the quiz you will need to download a FreeWave Network File (.FWN) and import the file into Tool Suite. The FWN can be downloaded the 'Basic_Network_Quiz.fwn' from the bottom of this article.  T...

There are two questions on the exam that will require you to examine support bundles from a ZumLink network. The bundles can be downloaded below.  

  You'll need to download and import an FWN into Network Diagnostics to answer questions on the SNT exam. The FWN can be downloaded from below: In Tool Suite click Network Diagnostics on the left p...

  Troubleshooting Flowchart   PDF documents for Troubleshooting Flowchart - Classic Serial:

These are some common issues encountered while using terminal emulators.  Nothing displays on the screen after placing the radio into Setup mode. This usually indicates one of two things; either...

Below are some common questions related FreeWave Radio Wire Replacement configuration. Q: Can I/O be used with a 1 Watt radio? A: The FGRIO-M functions as a standard 900 MHz 1 Watt serial radio wi...